全部原廠設備及配件 敢于承諾
燃燒率達 99% 使用更節能
全自動運行檢測 無需人工看守
常年連續使用 故障率極低
電話購買
貨到付款
正規代理
保證原裝
電話購買
TF834.3/836.3 - Oil Burner Safety Control For 1- or 2-stage oil power burners up to 30kg/h capacity with or without oil preheater and intermittent operations. Flame detection: - Photoresistor MZ 770 S - Infrared-flicker detector IRD 1010 - UV solid state sensor UVD 970 A special contact in the control unit short-circuits the thermo-switch of the oil preheater as soon as the burner is operating and the flame signal is present. Therefore interruption of the burner due to decreasing oil temperature (e.g. in case of high oil flow) can be prevented. If the control box goes into lock-out mode, the oil preheater power supply is also disconnected.
| TF834.2 | 1-stage operation |
| post-ignition time ca. 20 sec. | |
| low voltage protection according to EN230 | |
| TF834 E.3 | 1-stage operation |
| no post-ignition | |
| low voltage protection according to EN230 | |
| TF836.3 | 2-stage operation |
| post-ignition time 2-4 sec. | |
| low voltage protection according to EN230 |
暫無
暫無
2018-04-18
2018-03-12
2018-03-12
2018-03-05
2018-03-05
2018-03-05
2018-02-07
2018-02-07
展示工程現場，您知道我們更專業
